Command Reference Guide

VLAN Commands
CLI Command Reference
September 2014 Page 299
HP Moonshot Switch Module CLI Command Reference
vlan acceptframe
This command sets the frame acceptance mode on an interface or range of interfaces. For vlanonly mode,
untagged frames or priority frames received on this interface are discarded. For
all mode, untagged frames or
priority frames received on this interface are accepted and assigned the value of the interface VLAN ID for this
port. With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN
Specification. For the
admituntaggedonly option, the interface discards any tagged frames it receives.
no vlan acceptframe
This command resets the frame acceptance mode for the interface or range of interfaces to the default value.
vlan ingressfilter
This command enables ingress filtering on an interface or range of interfaces. If ingress filtering is disabled,
frames received with VLAN IDs that do not match the VLAN membership of the receiving interface are admitted
and forwarded to ports that are members of that VLAN.
no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs that do
not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are
members of that VLAN.
Default all
Format
vlan acceptframe {admituntaggedonly | vlanonly | all}
Mode Interface Config
Format
no vlan acceptframe
Mode Interface Config
Default disabled
Format
vlan ingressfilter
Mode Interface Config
Format
no vlan ingressfilter
Mode Interface Config