Command Reference Guide

VLAN Commands
CLI Command Reference
September 2014 Page 300
HP Moonshot Switch Module CLI Command Reference
vlan internal allocation
Use this command to configure which VLAN IDs to use for port-based routing interfaces. When a port-based
routing interface is created, an unused VLAN ID is assigned internally.
vlan makestatic
This command changes a dynamically created VLAN (created by GVRP registration) to a static VLAN (one that
is permanently configured and defined). The ID is a valid VLAN identification number. VLAN range is 2-4093.
vlan name
This command changes the name of a VLAN. The name is an alphanumeric string of up to 32 characters, and
the ID is a valid VLAN identification number. ID range is 1-4093.
no vlan name
This command sets the name of a VLAN to a blank string.
Format
vlan internal allocation {base vlan-id | policy ascending | policy decending}
Mode Global Config
Parameter Description
base vlan-id The first VLAN ID to be assigned to a port-based routing interface.
policy ascending VLAN IDs assigned to port-based routing interfaces start at the base and
increase in value
policy descending VLAN IDs assigned to port-based routing interfaces start at the base and
decrease in value
Format
vlan makestatic 2-4093
Mode VLAN Config
Default • VLAN ID 1 - default
• other VLANS - blank string
Format
vlan name 1-4093 name
Mode VLAN Config
Format
no vlan name 1-4093
Mode VLAN Config