Command Reference Guide

VLAN Commands
CLI Command Reference
September 2014 Page 302
HP Moonshot Switch Module CLI Command Reference
vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces.
The modes are defined as follows:
With both the
all and vlanonly options, VLAN tagged frames are forwarded in accordance with the IEEE
802.1Q VLAN Specification.
no vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces to Admit All. For Admit All mode, untagged
frames or priority frames received on this interface are accepted and assigned the value of the interface VLAN
ID for this port. With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q
VLAN Specification
.
vlan port ingressfilter all
This command enables ingress filtering for all ports. If ingress filtering is disabled, frames received with VLAN
IDs that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports
that are members of that VLAN.
Default all
Format
vlan port acceptframe all { admituntaggedonly | all | vlanonly}
Mode Global Config
Mode Definition
admituntaggedonly VLAN-tagged and priority tagged frames received on this interface are discarded.
all Untagged frames or priority frames received on this interface are accepted and
assigned the value of the interface VLAN ID for this port.
vlanonly Untagged frames or priority frames received on this interface are discarded.
Format
no vlan port acceptframe all
Mode Global Config
Default disabled
Format
vlan port ingressfilter all
Mode Global Config