Command Reference Guide

VLAN Commands
CLI Command Reference
September 2014 Page 303
HP Moonshot Switch Module CLI Command Reference
no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is disabled, frames received with VLAN
IDs that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports
that are members of that VLAN.
vlan port priority all
This command configures the default 802.1p priority assigned to untagged packets arriving at the interface
(Interface Config mode) or on all interfaces (Global Config mode). The priority value range is 0–7.
no vlan port priority all
This command sets the VLAN ID to the default value.
vlan port pvid all
This command changes the VLAN ID for all interface.
no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
Format
no vlan port ingressfilter all
Mode Global Config
Default 0
Format
vlan port priority all priority
Mode Global Config
Interface Config
Format
no vlan port priority all
Mode Global Config
Interface Config
Default 1
Format
vlan port pvid all 1-4093
Mode Global Config
Format
no vlan port pvid all
Mode Global Config