Command Reference Guide

VLAN Commands
CLI Command Reference
September 2014 Page 312
HP Moonshot Switch Module CLI Command Reference
show vlan association subnet
This command displays the VLAN associated with a specific configured IP-Address and net mask. If no IP
address and net mask are specified, the VLAN associations of all the configured IP-subnets are displayed.
show vlan association mac
This command displays the VLAN associated with a specific configured MAC address. If no MAC address is
specified, the VLAN associations of all the configured MAC addresses are displayed.
Acceptable Frame
Types
The types of frames that may be received on this port. The options are 'VLAN only' and
'Admit All'. When set to 'VLAN only', untagged frames or priority tagged frames received
on this port are discarded. When set to 'Admit All', untagged frames or priority tagged
frames received on this port are accepted and assigned the value of the Port VLAN ID for
this port. With either option, VLAN tagged frames are forwarded in accordance to the
802.1Q VLAN specification.
Ingress Filtering May be enabled or disabled. When enabled, the frame is discarded if this port is not a
member of the VLAN with which this frame is associated. In a tagged frame, the VLAN is
identified by the VLAN ID in the tag. In an untagged frame, the VLAN is the Port VLAN ID
specified for the port that received this frame. When disabled, all frames are forwarded in
accordance with the 802.1Q VLAN bridge specification. The factory default is disabled.
GVRP May be enabled or disabled.
Default Priority The 802.1p priority assigned to tagged packets arriving on the port.
Format
show vlan association subnet [ipaddr netmask]
Mode Privileged EXEC
Term Definition
IP Address The IP address assigned to each interface.
Net Mask The subnet mask.
VLAN ID There is a VLAN Identifier (VID) associated with each VLAN.
Format
show vlan association mac [macaddr]
Mode Privileged EXEC
Term Definition
Mac Address A MAC address for which the switch has forwarding and or filtering information. The format
is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as 8 bytes.
VLAN ID There is a VLAN Identifier (VID) associated with each VLAN.
Term Definition