Command Reference Guide

Switch Stacking
CLI Command Reference
September 2014 Page 32
HP Moonshot Switch Module CLI Command Reference
Example: The following shows example CLI display output for the command on a Moonshot-45G switch
module.
(Routing) #show switch 1
Switch............................ 1
Management Status................. Management Switch
Hardware Management Preference.... Unassigned
Admin Management Preference....... Unassigned
Switch Type....................... 0x68440101
Preconfigured Model Identifier.... HP Moonshot-45G
Plugged-in Model Identifier....... HP Moonshot-45G
Switch Status..................... OK
Switch Description................ HP Moonshot-45G Switch
Detected Code in Flash............ 1.0.0.15
SFS Last Attempt Status........... None
Up Time........................... 0 days 2 hrs 31 mins 9 secs
show supported switchtype
This commands displays information about all supported switch types or a specific switch type.
If you do not supply a value for
switchindex, the following output appears:
If you supply a value for
switchindex, the following output appears:
Format
show supported switchtype [switchindex]
Mode User EXEC
Privileged EXEC
Term Definition
SID The index into the database of supported switch types. This index is used when
preconfiguring a member to be added to the stack.
Switch Model ID The model identifier for the supported switch type.
Mgmt Pref The management preference value of the switch type.
Term Definition
Switch Type The 32-bit numeric switch type for the supported switch.
Model Identifier The model identifier for the supported switch type.
Switch
Description
The description for the supported switch type.
Management
Preference
The management preference value of the switch type.
Supported Cards Provides information about the supported cards in the device, including the slot number,
card index, and model identifier.