Command Reference Guide

Provisioning (IEEE 802.1p) Commands
CLI Command Reference
September 2014 Page 320
HP Moonshot Switch Module CLI Command Reference
Provisioning (IEEE 802.1p) Commands
This section describes the commands you use to configure provisioning (IEEE 802.1p,) which allows you to
prioritize ports.
vlan port priority all
This command configures the port priority assigned for untagged packets for all ports presently plugged into
the device. The range for the priority is 0-7. Any subsequent per port configuration will override this
configuration setting.
vlan priority
This command configures the default 802.1p port priority assigned for untagged packets for a specific interface.
The range for the priority is 0–7.
Format
vlan port priority all priority
Mode Global Config
Default 0
Format
vlan priority priority
Mode Interface Config