Command Reference Guide

GVRP Commands
CLI Command Reference
September 2014 Page 328
HP Moonshot Switch Module CLI Command Reference
show garp
This command displays GARP information.
GVRP Commands
This section describes the commands you use to configure and view GARP VLAN Registration Protocol (GVRP)
information. GVRP-enabled switches exchange VLAN configuration information, which allows GVRP to provide
dynamic VLAN creation on trunk ports and automatic VLAN pruning.
set gvrp adminmode
This command enables GVRP on the system.
no set gvrp adminmode
This command disables GVRP.
Format
show garp
Mode •Privileged EXEC
• User EXEC
Term Definition
GMRP Admin
Mode
The administrative mode of GARP Multicast Registration Protocol (GMRP) for the system.
GVRP Admin
Mode
The administrative mode of GARP VLAN Registration Protocol (GVRP) for the system.
Note: If GVRP is disabled, the system does not forward GVRP messages.
Default disabled
Format
set gvrp adminmode
Mode Privileged EXEC
Format
no set gvrp adminmode
Mode Privileged EXEC