Command Reference Guide

Stack Port Commands
CLI Command Reference
September 2014 Page 33
HP Moonshot Switch Module CLI Command Reference
Stack Port Commands
This section describes the commands you use to view and configure stack port information.
stack-port
This command sets stacking per port or range of ports to either stack or ethernet mode.
show stack-port
This command displays summary stack-port information for all interfaces.
For Each Interface:
Default stack
Format
stack-port unit/slot/port [{ethernet | stack}]
Mode Stack Global Config
Format
show stack-port
Mode Privileged EXEC
Term Definition
Unit The unit number.
Interface The slot and port numbers.
Configured Stack Mode Stack or Ethernet.
Running Stack Mode Stack or Ethernet.
Link Status Status of the link.
Link Speed Speed (Gbps) of the stack port link.