Command Reference Guide

Port-Based Network Access Control Commands
CLI Command Reference
September 2014 Page 334
HP Moonshot Switch Module CLI Command Reference
clear radius statistics
This command is used to clear all RADIUS statistics.
dot1x eapolflood
Use this command to enable EAPOL flood support on the switch.
no dot1x eapolflood
This command disables EAPOL flooding on the switch.
dot1x dynamic-vlan enable
Use this command to enable the switch to create VLANs dynamically when a RADIUS-assigned VLAN does not
exist in the switch.
no dot1x dynamic-vlan enable
Use this command to prevent the switch from creating VLANs when a RADIUS-assigned VLAN does not exist in
the switch.
Format
clear radius statistics
Mode Privileged EXEC
Default disabled
Format
dot1x eapolflood
Mode Global Config
Format
no dot1x eapolflood
Mode Global Config
Default Disabled
Format
dot1x dynamic-vlan enable
Mode Global Config
Format
no dot1x dynamic-vlan enable
Mode Global Config