Command Reference Guide

Port-Based Network Access Control Commands
CLI Command Reference
September 2014 Page 341
HP Moonshot Switch Module CLI Command Reference
no dot1x user
This command removes the user from the list of users with access to the specified port or all ports.
show authentication methods
Use this command to display information about the authentication methods.
Example: The following example displays the authentication configuration.
(Routing) #show authentication methods
Login Authentication Method Lists
---------------------------------
defaultList : local
networkList : local
Enable Authentication Method Lists
----------------------------------
enableList : enable none
enableNetList : enable deny
Line Login Method List Enable Method List
------- ----------------- ------------------
Console defaultList enableList
Telnet networkList enableList
SSH networkList enableNetList
DOT1X :
Format
no dot1x user user {unit/slot/port | all}
Mode Global Config
Format
show authentication methods
Mode Privileged EXEC
Term Definition
Authentication Login List The authentication login listname.
Method 1 The first method in the specified authentication login list, if any.
Method 2 The second method in the specified authentication login list, if any.
Method 3 The third method in the specified authentication login list, if any.