Command Reference Guide

Port-Based Network Access Control Commands
CLI Command Reference
September 2014 Page 342
HP Moonshot Switch Module CLI Command Reference
show dot1x
This command is used to show a summary of the global dot1x configuration, summary information of the dot1x
configuration for a specified port or all ports, the detailed dot1x configuration for a specified port and the dot1x
statistics for a specified port - depending on the tokens used.
If you do not use the optional parameters
unit/slot/port or vlanid, the command displays the global dot1x
mode, the VLAN Assignment mode, and the Dynamic VLAN Creation mode.
If you use the optional parameter
summary {unit/slot/port | all}, the dot1x configuration for the specified
port or all ports are displayed.
Format
show dot1x [{summary {unit/slot/port | all} | detail unit/slot/port | statistics unit/
slot/port]
Mode Privileged EXEC
Term Definition
Administrative
Mode
Indicates whether authentication control on the switch is enabled or disabled.
VLAN Assignment
Mode
Indicates whether assignment of an authorized port to a RADIUS-assigned VLAN is allowed
(enabled) or not (disabled).
Dynamic VLAN
Creation Mode
Indicates whether the switch can dynamically create a RADIUS-assigned VLAN if it does not
currently exist on the switch.
Monitor Mode Indicates whether the Dot1x Monitor mode on the switch is enabled or disabled.
EAPOL Flood
Mode
Indicates the administrative mode of EAPOL flood support on the switch.
Term Definition
Interface The interface whose configuration is displayed.
Control Mode The configured control mode for this port. Possible values are force-unauthorized | force-
authorized | auto | mac-based | authorized | unauthorized.
Operating
Control Mode
The control mode under which this port is operating. Possible values are authorized |
unauthorized.
Reauthentication
Enabled
Indicates whether re-authentication is enabled on this port.
Port Status Indicates whether the port is authorized or unauthorized. Possible values are authorized |
unauthorized.