Command Reference Guide

Port-Based Network Access Control Commands
CLI Command Reference
September 2014 Page 346
HP Moonshot Switch Module CLI Command Reference
show dot1x authentication-history
This command displays 802.1X authentication events and information during successful and unsuccessful
Dot1x authentication process for all interfaces or the specified interface. Use the optional keywords to display
only failure authentication events in summary or in detail.
EAP Request/Id
Frames
Transmitted
The number of EAP request/identity frames that have been transmitted by this
authenticator.
EAP Request
Frames
Transmitted
The number of EAP request frames (other than request/identity frames) that have been
transmitted by this authenticator.
Invalid EAPOL
Frames Received
The number of EAPOL frames that have been received by this authenticator in which the
frame type is not recognized.
EAP Length Error
Frames Received
The number of EAPOL frames that have been received by this authenticator in which the
frame type is not recognized.
Format
show dot1x authentication-history {unit/slot/port | all} [failed-auth-only] [detail]
Mode Privileged EXEC
Term Definition
Time Stamp The exact time at which the event occurs.
Interface Physical Port on which the event occurs.
Mac-Address The supplicant/client MAC address.
VLAN assigned The VLAN assigned to the client/port on authentication.
VLAN assigned
Reason
The type of VLAN ID assigned, which can be Guest VLAN, Unauth, Default, RADIUS
Assigned, or Monitor Mode VLAN ID.
Auth Status The authentication status.
Reason The actual reason behind the successful or failed authentication.
Term Definition