Command Reference Guide

802.1X Supplicant Commands
CLI Command Reference
September 2014 Page 349
HP Moonshot Switch Module CLI Command Reference
dot1x supplicant max-start
This command configures the number of attempts that the supplicant makes to find the authenticator before
the supplicant assumes that there is no authenticator.
no dot1x supplicant max-start
This command sets the max-start value to the default.
dot1x supplicant timeout start-period
This command configures the start period timer interval to wait for the EAP identity request from the
authenticator.
no dot1x supplicant timeout start-period
This command sets the start-period value to the default.
dot1x supplicant timeout held-period
This command configures the held period timer interval to wait for the next authentication on previous
authentication fail.
Default 3
Format
dot1x supplicant max-start <1-10>
Mode Interface Config
Format
no dot1x supplicant max-start
Mode Interface Config
Default 30 seconds
Format
dot1x supplicant timeout start-period <1-65535 seconds>
Mode Interface Config
Format
no dot1x supplicant timeout start-period
Mode Interface Config
Default 60 seconds
Format
dot1x supplicant timeout held-period <1-65535 seconds>
Mode Interface Config