Command Reference Guide

Stack Firmware Synchronization Commands
CLI Command Reference
September 2014 Page 35
HP Moonshot Switch Module CLI Command Reference
Stack Firmware Synchronization Commands
Stack Firmware Synchronization (SFS) provides the ability to automatically synchronize firmware for all stack
members. If a unit joins the stack and its firmware version is different from the version running on the stack
manager, the SFS feature can either upgrade or downgrade the firmware on the mismatched stack member.
There is no attempt to synchronize the stack to the latest firmware in the stack.
For optimal operation, use the recommended firmware version.
For more information on recommended firmware versions, see the HP website (http://www.hp.com/go/
servers/Moonshot/download).
boot auto-copy-sw
Use this command to enable the Stack Firmware Synchronization feature on the stack.
no boot auto-copy-sw
Use this command to disable the Stack Firmware Synchronization feature on the stack
boot auto-copy-sw trap
Use this command to enable the sending of SNMP traps related to the Stack Firmware Synchronization feature.
no boot auto-copy-sw trap
Use this command to disable the sending of traps related to the Stack Firmware Synchronization feature.
Default Disabled
Format
boot auto-copy-sw
Mode Privileged Exec
Format
no boot auto-copy-sw
Mode Privileged Exec
Default Enabled
Format
boot auto-copy-sw trap
Mode Privileged Exec
Format
no boot auto-copy-sw trap
Mode Privileged Exec