Command Reference Guide

802.1X Supplicant Commands
CLI Command Reference
September 2014 Page 350
HP Moonshot Switch Module CLI Command Reference
no dot1x supplicant timeout held-period
This command sets the held-period value to the default value.
dot1x supplicant timeout auth-period
This command configures the authentication period timer interval to wait for the next EAP request challenge
from the authenticator.
no dot1x supplicant timeout auth-period
This command sets the auth-period value to the default value.
dot1x supplicant user
Use this command to map the given user to the port.
Format
no dot1x supplicant timeout held-period
Mode Interface Config
Default 30 seconds
Format
dot1x supplicant timeout auth-period <1-65535 seconds>
Mode Interface Config
Format
no dot1x supplicant timeout auth-period
Mode Interface Config
Format
dot1x supplicant user
Mode Interface Config