Command Reference Guide

Storm-Control Commands
CLI Command Reference
September 2014 Page 357
HP Moonshot Switch Module CLI Command Reference
no storm-control unicast rate
This command sets the unicast storm recovery threshold to the default value for all interfaces (Global Config
mode) or one or more interfaces (Interface Config mode) and disables unicast storm recovery.
show storm-control
This command displays switch configuration information. If you do not use any of the optional parameters, this
command displays global storm control configuration parameters:
• Broadcast Storm Recovery Mode may be enabled or disabled. The factory default is disabled.
• 802.3x Flow Control Mode may be enabled or disabled. The factory default is disabled.
Use the
all keyword to display the per-port configuration parameters for all interfaces, or specify the unit/
slot/port to display information about a specific interface.
Example: The following shows example CLI display output for the command.
(Routing) #show storm-control
(Routing) #show storm-control
Broadcast Storm Control Mode................... Disable
Broadcast Storm Control Level.................. 5 percent
Multicast Storm Control Mode................... Disable
Multicast Storm Control Level.................. 5 percent
Unicast Storm Control Mode..................... Disable
Unicast Storm Control Level.................... 5 percent
Format
no storm-control unicast rate
Mode • Global Config
•Interface Config
Format
show storm-control [all | unit/slot/port]
Mode Privileged EXEC
Parameter Definition
Bcast Mode Shows whether the broadcast storm control mode is enabled or disabled. The factory
default is disabled.
Bcast Level The broadcast storm control level.
Mcast Mode Shows whether the multicast storm control mode is enabled or disabled.
Mcast Level The multicast storm control level.
Ucast Mode Shows whether the Unknown Unicast or DLF (Destination Lookup Failure) storm control
mode is enabled or disabled.
Ucast Level The Unknown Unicast or DLF (Destination Lookup Failure) storm control level.