Command Reference Guide

Stack Firmware Synchronization Commands
CLI Command Reference
September 2014 Page 36
HP Moonshot Switch Module CLI Command Reference
boot auto-copy-sw allow-downgrade
Use this command to allow the stack manager to downgrade the firmware version on the stack member if the
firmware version on the manager is older than the firmware version on the member.
no boot auto-copy-sw allow-downgrade
Use this command to prevent the stack manager from downgrading the firmware version of a stack member.
show auto-copy-sw
Use this command to display Stack Firmware Synchronization configuration status information.
Default Enabled
Format
boot auto-copy-sw allow-downgrade
Mode Privileged Exec
Format
no boot auto-copy-sw allow-downgrade
Mode Privileged Exec
Format
show auto-copy-sw
Mode Privileged Exec
Term Definition
Synchronization Shows whether the SFS feature is enabled.
SNMP Trap Status Shows whether the stack will send traps for SFS events.
Allow Downgrade Shows wether the manager is permitted to downgrade the firmware version of a
stack member.