Command Reference Guide

MMRP Commands
CLI Command Reference
September 2014 Page 361
HP Moonshot Switch Module CLI Command Reference
mmrp (Interface Config)
Use the mmrp command in Interface Config mode on the interface. MMRP can be enabled on physical interfaces
or LAG interfaces. When configured on a LAG member port, MMRP is operationally disabled. Enabling MMRP
on an interface automatically enables dynamic MFDB entries creation.
no mmrp (Interface Config)
Use the no mmrp command in Interface Config mode to disable MMRP mode on the interface.
clear mmrp statistics
Use the clear mmrp command in Privileged EXEC mode to clear MMRP statistics of one or all interfaces.
Default disabled
Format
mmrp
Mode Interface Config
Format
no mmrp
Mode Interface Config
Format
clear mmrp statistics [unit/slot/port|all]
Mode Privileged EXEC
Parameter Description
unit/slot/port
If used with unit/slot/port parameter, the command clears MMRP statistics for the given
interface.
all If the all parameter is specified, the command clears MMRP statistics for all the interfaces.