Command Reference Guide

MMRP Commands
CLI Command Reference
September 2014 Page 362
HP Moonshot Switch Module CLI Command Reference
show mmrp
Use the show mmrp command in Privileged EXEC mode to display the status of the MMRP mode on the switch,
on a specified interface, or on all interfaces.
When the command is issued with the
interface keyword and an interface is specified, the administrative
mode of MMRP for the interface displays. If the
interface summary keywords are used, the administrative
mode for all interfaces is displayed.
The following table shows the fields that display when the command is issued with the
summary keyword.
The following shows example CLI display output for the command.
(Routing) #show mmrp summary
MMRP Global Admin Mode......................... Disabled
MMRP Periodic State Machine.................... Disabled
(Routing) #show mmrp interface 1/0/12
MMRP Interface Admin Mode...................... Disabled
(Routing) #show mmrp interface summary
Intf Mode
--------- ---------
0/1 Disabled
0/2 Disabled
0/3 Disabled
0/4 Disabled
0/5 Disabled
0/6 Disabled
0/7 Disabled
0/8 Disabled
0/9 Disabled
0/10 Disabled
0/11 Disabled
0/12 Disabled
0/13 Disabled
0/14 Disabled
Format
show mmrp {interface [unit/slot/port [summary] | summary]}
Mode Privileged EXEC
Parameter Description
MMRP Global Admin Mode The administrative mode of MMRP on the switch.
MMRP Periodic State Machine Indicates whether the MMRP periodic state machine on the switch is
currently enabled or disabled.