Command Reference Guide

MVRP Commands
CLI Command Reference
September 2014 Page 366
HP Moonshot Switch Module CLI Command Reference
show mvrp
Use the show mvrp command in Privileged EXEC mode to display the status of the MVRP mode.
When the
interface all keywords are used, the administrative mode of MVRP on all interfaces is displayed.
When the command is issued with the
interface keyword and an interface is specified, the information in the
following table is displayed.
The following table shows the fields that display when the command is issued with the
summary keyword.
Example: The following shows example CLI display output for the command.
(Routing) #show mvrp summary
MVRP global state.............................. Disabled
MVRP Periodic State Machine state.............. Disabled
VLANs created via MVRP......................... 20-45, 3001-3050
Example: The following shows example CLI display output for the command.
(Routing) #show mvrp interface 1/0/12
MVRP interface state........................... Enabled
VLANs declared................................. 20-45, 3001-3050
VLANs registered............................... none
Format
show mvrp {interface {unit/slot/port | all} | summary}
Mode Privileged EXEC
Parameter Description
MVRP interface state The administrative mode of MVRP on the interface.
VLANs declared The number of VLANs that have been declared by the MVRP protocol.
VLANs registered The number of VLANs that have been registered by the MVRP protocol.
Parameter Description
MVRP global state The administrative mode of MVRP on the switch.
MVRP Periodic State Machine
State
The administrative mode of the MVRP periodic state machine on the switch.
VLANs created via MVRP The number of VLANs that have been created on the switch by the MVRP
protocol.