Command Reference Guide

Port-Channel/LAG (802.3ad) Commands
CLI Command Reference
September 2014 Page 370
HP Moonshot Switch Module CLI Command Reference
lacp admin key
Use this command to configure the administrative value of the key for the port-channel. The value range of key
is 0 to 65535. This command can be used to configure a single interface or a range of interfaces.
no lacp admin key
Use this command to configure the default administrative value of the key for the port-channel.
lacp collector max-delay
Use this command to configure the port-channel collector max delay. This command can be used to configure
a single interface or a range of interfaces.The valid range of
delay is 0-65535.
no lacp collector max delay
Use this command to configure the default port-channel collector max delay.
Default 0x8000
Format
lacp admin key key
Mode Interface Config
Note: This command is applicable only to port-channel interfaces.
Format
no lacp admin key
Mode Interface Config
Default 0x8000
Format
lacp collector max delay delay
Mode Interface Config
Note: This command is applicable only to port-channel interfaces.
Format
no lacp collector max delay
Mode Interface Config