Command Reference Guide

Port-Channel/LAG (802.3ad) Commands
CLI Command Reference
September 2014 Page 371
HP Moonshot Switch Module CLI Command Reference
lacp actor admin key
Use this command to configure the administrative value of the LACP actor admin key on an interface or range
of interfaces. The valid range for
key is 0-65535.
no lacp actor admin key
Use this command to configure the default administrative value of the key.
lacp actor admin state individual
Use this command to set LACP actor admin state to individual.
no lacp actor admin state individual
Use this command to set the LACP actor admin state to aggregation.
Default Internal Interface Number of this Physical Port
Format
lacp actor admin key key
Mode Interface Config
Note: This command is applicable only to physical interfaces.
Format
no lacp actor admin key
Mode Interface Config
Format
lacp actor admin state individual
Mode Interface Config
Note: This command is applicable only to physical interfaces.
Format
no lacp actor admin state individual
Mode Interface Config