Command Reference Guide

Port-Channel/LAG (802.3ad) Commands
CLI Command Reference
September 2014 Page 373
HP Moonshot Switch Module CLI Command Reference
lacp actor port priority
Use this command to configure the priority value assigned to the Aggregation Port for an interface or range of
interfaces. The valid range for
priority is 0 to 65535.
no lacp actor port priority
Use this command to configure the default priority value assigned to the Aggregation Port.
lacp partner admin key
Use this command to configure the administrative value of the Key for the protocol partner. This command can
be used to configure a single interface or a range of interfaces. The valid range for
key is 0 to 65535.
no lacp partner admin key
Use this command to set the administrative value of the Key for the protocol partner to the default.
Default 0x80
Format
lacp actor port priority 0-65535
Mode Interface Config
Note: This command is applicable only to physical interfaces.
Format
no lacp actor port priority
Mode Interface Config
Default 0x0
Format
lacp partner admin key key
Mode Interface Config
Note: This command is applicable only to physical interfaces.
Format
no lacp partner admin key
Mode Interface Config