Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsMoonshot SystemsHP Moonshot-45G Switch Module
371372373374375376377378379380
Port-Channel/LAG (802.3ad) Commands
CLI Command Reference
September 2014 Page 374
HP Moonshot Switch Module CLI Command Reference
lacp partner admin state individual
Use this command to set LACP partner admin state to individual.
no lacp partner admin state individual
Use this command to set the LACP partner admin state to aggregation.
lacp partner admin state longtimeout
Use this command to set LACP partner admin state to longtimeout.
no lacp partner admin state longtimeout
Use this command to set the LACP partner admin state to short timeout
.
Format
lacp partner admin state individual
Mode Interface Config
Note: This command is applicable only to physical interfaces.
Format
no lacp partner admin state individual
Mode Interface Config
Format
lacp partner admin state longtimeout
Mode Interface Config
Note: This command is applicable only to physical interfaces.
Format
no lacp partner admin state longtimeout
Mode Interface Config
Note: This command is applicable only to physical interfaces.