Command Reference Guide

Port-Channel/LAG (802.3ad) Commands
CLI Command Reference
September 2014 Page 379
HP Moonshot Switch Module CLI Command Reference
port lacptimeout (Interface Config)
This command sets the timeout on a physical interface or range of interfaces of a particular device type (actor
or partner) to either long or short timeout.
no port lacptimeout
This command sets the timeout back to its default value on a physical interface of a particular device type
(actor or partner).
port lacptimeout (Global Config)
This command sets the timeout for all interfaces of a particular device type (actor or partner) to either long or
short timeout.
no port lacptimeout
This command sets the timeout for all physical interfaces of a particular device type (actor or partner) back to
their default values.
port-channel adminmode
This command enables a port-channel (LAG). The option all sets every configured port-channel with the same
administrative mode setting.
Default long
Format
port lacptimeout {actor | partner} {long | short}
Mode Interface Config
Format
no port lacptimeout {actor | partner}
Mode Interface Config
Default long
Format
port lacptimeout {actor | partner} {long | short}
Mode Global Config
Format
no port lacptimeout {actor | partner}
Mode Global Config
Format
port-channel adminmode [all]
Mode Global Config