Command Reference Guide

Port-Channel/LAG (802.3ad) Commands
CLI Command Reference
September 2014 Page 380
HP Moonshot Switch Module CLI Command Reference
no port-channel adminmode
This command disables a port-channel (LAG). The option all sets every configured port-channel with the same
administrative mode setting.
port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The interface is a logical unit/slot/
port
for a configured port-channel. The option all sets every configured port-channel with the same
administrative mode setting. Instead of
unit/slot/port, lag lag-intf-num can be used as an alternate way to
specify the LAG interface.
lag lag-intf-num can also be used to specify the LAG interface where lag-intf-num
is the LAG port number.
no port-channel linktrap
This command disables link trap notifications for the port-channel (LAG). The interface is a logical slot and port
for a configured port-channel. The option
all sets every configured port-channel with the same administrative
mode setting.
Format
no port-channel adminmode [all]
Mode Global Config
Default enabled
Format
port-channel linktrap {unit/slot/port | all | lag lag-intf-num}
Mode Global Config
Format
no port-channel linktrap {logical unit/slot/port | all}
Mode Global Config