Command Reference Guide

Port-Channel/LAG (802.3ad) Commands
CLI Command Reference
September 2014 Page 387
HP Moonshot Switch Module CLI Command Reference
Example: The following shows example CLI display output for the command.
(Routing) #show port-channel 1 counters
Local Interface................................ 0/3/1
Channel Name................................... ch1
Link State..................................... Down
Admin Mode..................................... Enabled
Port Channel Flap Count........................ 0
Mbr Mbr Flap
Ports Counters
------ ---------
1/0/1 0
1/0/2 0
1/0/3 1
1/0/4 0
1/0/5 0
1/0/6 0
1/0/7 0
1/0/8 0
clear port-channel counters
Use this command to clear and reset specified port-channel and member flap counters for the specified
interface.
clear port-channel all counters
Use this command to clear and reset all port-channel and member flap counters for the specified interface.
Mbr Ports The slot/port for the port member.
Mbr Flap
Counters
The number of times a port member is inactive, either because the link is down, or the
admin state is disabled.
Format
clear port-channel {lag-intf-num | unit/slot/port} counters
Mode Privileged EXEC
Format
clear port-channel all counters
Mode Privileged EXEC
Term Definition