Command Reference Guide

DHCP L2 Relay Agent Commands
CLI Command Reference
September 2014 Page 397
HP Moonshot Switch Module CLI Command Reference
no dhcp l2relay circuit-id vlan
This parameter clears the DHCP Option-82 Circuit ID for a VLAN.
dhcp l2relay remote-id vlan
This parameter sets the DHCP Option-82 Remote ID for a VLAN and subscribed service (based on subscription-
name).
no dhcp l2relay remote-id vlan
This parameter clears the DHCP Option-82 Remote ID for a VLAN and subscribed service (based on
subscription-name).
dhcp l2relay trust
Use this command to configure an interface or range of interfaces as trusted for Option-82 reception.
no dhcp l2relay trust
Use this command to configure an interface to the default untrusted for Option-82 reception.
Format
no dhcp l2relay circuit-id vlan vlan-list
Mode Global Config
Format
dhcp l2relay remote-id remote-id-string vlan vlan-list
Mode Global Config
Parameter Description
vlan–list The VLAN ID. The range is 1–4093. Separate non-consecutive IDs with a comma (,) no
spaces and no zeros in between the range. Use a dash (–) for the range.
Format
no dhcp l2relay remote-id vlan vlan-list
Mode Global Config
Default untrusted
Format
dhcp l2relay trust
Mode Interface Config
Format
no dhcp l2relay trust
Mode Interface Config