Command Reference Guide

Nonstop Forwarding Commands
CLI Command Reference
September 2014 Page 40
HP Moonshot Switch Module CLI Command Reference
show checkpoint statistics
This command displays general information about the checkpoint service operation.
clear checkpoint statistics
This command clears all checkpoint statistics to their initial values.
Format
show checkpoint statistics
Mode Privileged Exec
Parameter Description
Messages Checkpointed Number of checkpoint messages transmitted to the backup unit. Range: Integer.
Default: 0
Bytes Checkpointed Number of bytes transmitted to the backup unit. Range: Integer. Default: 0
Time Since Counters Cleared Number of days, hours, minutes and seconds since the counters were reset to
zero. The counters are cleared when a unit becomes manager and with a
support command. Range: Time Stamp. Default: 0d00:00:00
Checkpoint Message Rate Average number of checkpoint messages per second. The average is computed
over the time period since the counters were cleared. Range: Integer. Default: 0
Last 10-second Message Rate Average number of checkpoint messages per second in the last 10-second
interval. This average is updated once every 10 seconds. Range: Integer.
Default: 0
Highest 10-second Message
Rate
The highest rate recorded over a 10-second interval since the counters were
cleared. Range: Integer. Default: 0
Format
clear checkpoint statistics
Mode Privileged Exec