Command Reference Guide

DHCP L2 Relay Agent Commands
CLI Command Reference
September 2014 Page 400
HP Moonshot Switch Module CLI Command Reference
show dhcp l2relay stats interface
This command displays statistics specific to DHCP L2 Relay configured interface.
Example: The following shows example CLI display output for the command.
(Routing) #show dhcp l2relay stats interface all
DHCP L2 Relay is Enabled.
Interface UntrustedServer UntrustedClient TrustedServer TrustedClient
MsgsWithOpt82 MsgsWithOpt82 MsgsWithoutOpt82 MsgsWithoutOpt82
--------- --------------- ----------------- ----------------- --------------
1/0/1 0 0 0 0
1/0/2 0 0 3 7
1/0/3 0 0 0 0
show dhcp l2relay agent-option vlan
This command displays the DHCP L2 Relay Option-82 configuration specific to VLAN.
Example: The following shows example CLI display output for the command.
(Routing) #show dhcp l2relay agent-option vlan 5-10
DHCP L2 Relay is Enabled.
VLAN Id L2 Relay CircuitId RemoteId
--------- ---------- ----------- ------------
5 Enabled Enabled --NULL--
6 Enabled Enabled hp
7 Enabled Disabled --NULL--
8 Enabled Disabled --NULL--
9 Enabled Disabled --NULL--
10 Enabled Disabled --NULL--
Format
show dhcp l2relay stats interface {all | interface-num}
Mode Privileged EXEC
Format
show dhcp l2relay agent-option vlan vlan-range
Mode Privileged EXEC