Command Reference Guide

DHCP Snooping Configuration Commands
CLI Command Reference
September 2014 Page 403
HP Moonshot Switch Module CLI Command Reference
DHCP Snooping Configuration Commands
This section describes commands you use to configure DHCP Snooping.
ip dhcp snooping
Use this command to enable DHCP Snooping globally.
no ip dhcp snooping
Use this command to disable DHCP Snooping globally.
ip dhcp snooping vlan
Use this command to enable DHCP Snooping on a list of comma-separated VLAN ranges.
no ip dhcp snooping vlan
Use this command to disable DHCP Snooping on VLANs.
ip dhcp snooping verify mac-address
Use this command to enable verification of the source MAC address with the client hardware address in the
received DCHP message.
Default disabled
Format
ip dhcp snooping
Mode Global Config
Format
no ip dhcp snooping
Mode Global Config
Default disabled
Format
ip dhcp snooping vlan vlan-list
Mode Global Config
Format
no ip dhcp snooping vlan vlan-list
Mode Global Config
Default enabled
Format
ip dhcp snooping verify mac-address
Mode Global Config