Command Reference Guide

DHCP Snooping Configuration Commands
CLI Command Reference
September 2014 Page 404
HP Moonshot Switch Module CLI Command Reference
no ip dhcp snooping verify mac-address
Use this command to disable verification of the source MAC address with the client hardware address.
ip dhcp snooping database
Use this command to configure the persistent location of the DHCP Snooping database. This can be local or a
remote file on a given IP machine.
ip dhcp snooping database write-delay
Use this command to configure the interval in seconds at which the DHCP Snooping database will be persisted.
The interval value ranges from 15 to 86400 seconds.
no ip dhcp snooping database write-delay
Use this command to set the write delay value to the default value.
ip dhcp snooping binding
Use this command to configure static DHCP Snooping binding.
Format
no ip dhcp snooping verify mac-address
Mode Global Config
Default local
Format
ip dhcp snooping database {local|tftp://hostIP/filename}
Mode Global Config
Default 300 seconds
Format
ip dhcp snooping database write-delay in seconds
Mode Global Config
Format
no ip dhcp snooping database write-delay
Mode Global Config
Format
ip dhcp snooping binding mac-address vlan vlan_id ip_address interface {interface_id
| lag lag-group-id}
Mode Global Config