Command Reference Guide

DHCP Snooping Configuration Commands
CLI Command Reference
September 2014 Page 409
HP Moonshot Switch Module CLI Command Reference
show ip dhcp snooping database
Use this command to display the DHCP Snooping configuration related to the database persistency.
Example: The following shows example CLI display output for the command.
(Routing) #show ip dhcp snooping database
agent url: /10.131.13.79:/sai1.txt
write-delay: 5000
show ip dhcp snooping interfaces
Use this command to show the DHCP Snooping status of the interfaces.
Example: The following shows example CLI display output for the command.
(Routing) #show ip dhcp snooping interfaces
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
----------- ---------- ---------- --------------
1/0/1 No 15 1
1/0/2 No 15 1
1/0/3 No 15 1
(Routing) #show ip dhcp snooping interfaces ethernet 1/0/15
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
----------- ---------- ---------- --------------
1/0/15 Yes 15 1
Format
show ip dhcp snooping database
Mode Privileged EXEC
Term Definition
Agent URL Bindings database agent URL.
Write Delay The maximum write time to write the database into local or remote.
Format
show ip dhcp snooping interfaces
Mode Privileged EXEC