Command Reference Guide

DHCP Snooping Configuration Commands
CLI Command Reference
September 2014 Page 411
HP Moonshot Switch Module CLI Command Reference
clear ip dhcp snooping binding
Use this command to clear all DHCP Snooping bindings on all interfaces or on a specific interface.
clear ip dhcp snooping statistics
Use this command to clear all DHCP Snooping statistics.
show ip verify source
Use this command to display the IPSG configurations on all ports.
Example: The following shows example CLI display output for the command.
(Routing) #show ip verify source
Interface Filter Type IP Address MAC Address Vlan
--------- ----------- --------------- ----------------- -----
0/1 ip-mac 210.1.1.3 00:02:B3:06:60:80 10
0/1 ip-mac 210.1.1.4 00:0F:FE:00:13:04 10
Format
clear ip dhcp snooping binding [interface unit/slot/port]
Mode Privileged EXEC
Format
clear ip dhcp snooping statistics
Mode Privileged EXEC
Format
show ip verify source
Mode Privileged EXEC
Term Definition
Interface Interface address in
unit/slot/port format.
Filter Type Is one of two values:
• ip-mac: User has configured MAC address filtering on this interface.
• ip: Only IP address filtering on this interface.
IP Address IP address of the interface
MAC Address If MAC address filtering is not configured on the interface, the MAC Address field is empty.
If port security is disabled on the interface, then the MAC Address field displays “permit-
all.”
VLAN The VLAN for the binding rule.