Command Reference Guide

DHCP Snooping Configuration Commands
CLI Command Reference
September 2014 Page 412
HP Moonshot Switch Module CLI Command Reference
show ip verify interface
Use this command to display the IPSG filter type for a specific interface.
show ip source binding
Use this command to display the IPSG bindings.
Example: The following shows example CLI display output for the command.
(Routing) #show ip source binding
MAC Address IP Address Type Vlan Interface
----------------- --------------- ------------- ----- -------------
00:00:00:00:00:08 1.2.3.4 dhcp-snooping 2 1/0/1
00:00:00:00:00:09 1.2.3.4 dhcp-snooping 3 1/0/1
00:00:00:00:00:0A 1.2.3.4 dhcp-snooping 4 1/0/1
Format
show ip verify interface unit/slot/port
Mode Privileged EXEC
Term Definition
Interface Interface address in
unit/slot/port format.
Filter Type Is one of two values:
• ip-mac: User has configured MAC address filtering on this interface.
• ip: Only IP address filtering on this interface.
Format
show ip source binding [{static/dynamic}] [interface unit/slot/port] [vlan id]
Mode Privileged EXEC
Term Definition
MAC Address The MAC address for the entry that is added.
IP Address The IP address of the entry that is added.
Type Entry type; statically configured from CLI or dynamically learned from DHCP Snooping.
VLAN VLAN for the entry.
Interface IP address of the interface in
unit/slot/port format.