Command Reference Guide

Dynamic ARP Inspection Commands
CLI Command Reference
September 2014 Page 414
HP Moonshot Switch Module CLI Command Reference
no ip arp inspection validate
Use this command to disable the additional validation checks on the received ARP packets.
ip arp inspection vlan logging
Use this command to enable logging of invalid ARP packets on a list of comma-separated VLAN ranges.
no ip arp inspection vlan logging
Use this command to disable logging of invalid ARP packets on a list of comma-separated VLAN ranges.
ip arp inspection trust
Use this command to configure an interface or range of interfaces as trusted for Dynamic ARP Inspection.
no ip arp inspection trust
Use this command to configure an interface as untrusted for Dynamic ARP Inspection.
Format
no ip arp inspection validate {src-mac [dst-mac] [ip] | dst-mac [ip] | ip}
Mode Global Config
Default enabled
Format
ip arp inspection vlan vlan-list logging
Mode Global Config
Format
no ip arp inspection vlan vlan-list logging
Mode Global Config
Default enabled
Format
ip arp inspection trust
Mode Interface Config
Format
no ip arp inspection trust
Mode Interface Config