Command Reference Guide

Enable and Do Commands
CLI Command Reference
September 2014 Page 42
HP Moonshot Switch Module CLI Command Reference
Enable and Do Commands
enable (Privileged EXEC access)
This command gives you access to the Privileged EXEC mode. From the Privileged EXEC mode, you can
configure the network interface.
do (Privileged EXEC commands)
This command executes Privileged EXEC mode commands from any of the configuration modes.
Example: The following is an example of the
do command that executes the Privileged Exec command
script list in Global Config Mode.
(Routing) #configure
(Routing)(config)#do script list
Configuration Script Name Size(Bytes)
-------------------------------- -----------
backup-config 2105
running-config 4483
startup-config 445
3 configuration script(s) found.
2041 Kbytes free.
Format
enable
Mode User EXEC
Format
do Priv Exec Mode Command
Mode • Global Config
•Interface Config
•VLAN Config
• Routing Config