Command Reference Guide

IGMP Snooping Configuration Commands
CLI Command Reference
September 2014 Page 425
HP Moonshot Switch Module CLI Command Reference
set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time. The time is set for the system, on a particular
interface or VLAN, or on a range of interfaces. This is the amount of time in seconds that a switch waits for a
query to be received on an interface before the interface is removed from the list of interfaces with multicast
routers attached. The range is 0 to 3600 seconds. A value of 0 indicates an infinite time-out, i.e. no expiration.
no set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is set for the system, on a
particular interface or a VLAN.
set igmp mrouter
This command configures the VLAN ID (vlan_id) that has the multicast router mode enabled.
no set igmp mrouter
This command disables multicast router mode for a particular VLAN ID (vlan_id).
Default 0
Format
set igmp mcrtrexpiretime vlan_id 0-3600
Mode VLAN Config
Default 0
Format
set igmp mcrtrexpiretime 0-3600
Mode • Global Config
•Interface Config
Format
no set igmp mcrtrexpiretime vlan_id
Mode VLAN Config
Format
no set igmp mcrtrexpiretime
Mode • Global Config
•Interface Config
Format
set igmp mrouter vlan_id
Mode Interface Config
Format
no set igmp mrouter vlan_id
Mode Interface Config