Command Reference Guide

IGMP Snooping Configuration Commands
CLI Command Reference
September 2014 Page 426
HP Moonshot Switch Module CLI Command Reference
set igmp mrouter interface
This command configures the interface or range of interfaces as a multicast router interface. When configured
as a multicast router interface, the interface is treated as a multicast router interface in all VLANs.
no set igmp mrouter interface
This command disables the status of the interface as a statically configured multicast router interface.
set igmp report-suppression
Use this command to suppress the IGMP reports on a given VLAN ID. In order to optimize the number of reports
traversing the network with no added benefits, a Report Suppression mechanism is implemented. When more
than one client responds to an MGMD query for the same Multicast Group address within the max-response-
time, only the first response is forwarded to the query and others are suppressed at the switch.
Example: The following shows an example of the command.
(Routing) #vlan database
(Routing) (Vlan)#set igmp report-suppression ?
<1-4093> Enter VLAN ID.
(Routing) (Vlan)#set igmp report-suppression 1
Default disabled
Format
set igmp mrouter interface
Mode Interface Config
Format
no set igmp mrouter interface
Mode Interface Config
Default Disabled
Format
set igmp report-suppression vlan-id
Mode VLAN Config
Parameter Description
vlan-id A valid VLAN ID. Range is 1 to 4093.