Command Reference Guide

IGMP Snooping Configuration Commands
CLI Command Reference
September 2014 Page 429
HP Moonshot Switch Module CLI Command Reference
show igmpsnooping mrouter vlan
This command displays information about statically configured ports.
show igmpsnooping ssm
This command displays information about Source Specific Multicasting (SSM) by entry, group, or statistics. SSM
delivers multicast packets to receivers that originated from a source address specified by the receiver. SSM is
only available with IGMPv3 and MLDv2.
show mac-address-table igmpsnooping
This command displays the IGMP Snooping entries in the MFDB table.
Format
show igmpsnooping mrouter vlan unit/slot/port
Mode Privileged EXEC
Term Definition
Interface The port on which multicast router information is being displayed.
VLAN ID The list of VLANs of which the interface is a member.
Format
show igmpsnooping ssm {entries | groups | stats}
Mode Privileged EXEC
Format
show mac-address-table igmpsnooping
Mode Privileged EXEC
Term Definition
VLAN ID The VLAN in which the MAC address is learned.
MAC Address A multicast MAC address for which the switch has forwarding or filtering information. The
format is 6 two-digit hexadecimal numbers that are separated by colons, for example
01:23:45:67:89:AB.
Type The type of the entry, which is either static (added by the user) or dynamic (added to the
table as a result of a learning process or protocol).
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).