Command Reference Guide

IGMP Snooping Querier Commands
CLI Command Reference
September 2014 Page 431
HP Moonshot Switch Module CLI Command Reference
no set igmp querier
Use this command to disable IGMP Snooping Querier on the system.
set igmp querier query-interval
Use this command to set the IGMP Querier Query Interval time. It is the amount of time in seconds that the
switch waits before sending another general query.
no set igmp querier query-interval
Use this command to set the IGMP Querier Query Interval time to its default value.
set igmp querier timer expiry
Use this command to set the IGMP Querier timer expiration period. It is the time period that the switch remains
in Non-Querier mode once it has discovered that there is a Multicast Querier in the network.
no set igmp querier timer expiry
Use this command to set the IGMP Querier timer expiration period to its default value.
Format
no set igmp querier [vlan-id]
Mode VLAN Database
Format
no set igmp querier
Mode Global Config
Default disabled
Format
set igmp querier query-interval 1-1800
Mode Global Config
Format
no set igmp querier query-interval
Mode Global Config
Default 60 seconds
Format
set igmp querier timer expiry 60-300
Mode Global Config
Format
no set igmp querier timer expiry
Mode Global Config