Command Reference Guide

IGMP Snooping Querier Commands
CLI Command Reference
September 2014 Page 433
HP Moonshot Switch Module CLI Command Reference
When the optional parameters are not used, the command displays the following information.
When you specify a value for
vlanid, the following information is displayed.
When the optional argument
detail is used, the command shows the global information and the information
for all Querier-enabled VLANs.
Field Description
IGMP Snooping
Querier Mode
The administrative mode of IGMP Snooping Querier on the switch.
Querier Address The IP address which will be used in the IPv4 header while sending out IGMP queries. It can
be configured using the appropriate command.
IGMP Version The version of IGMP that will be used while sending out the queries.
Querier Query
Interval
The amount of time in seconds that a Snooping Querier waits before sending out the
periodic general query.
Querier Expiry
Timeout
The amount of time to wait in the non-querier operational state before moving to a Querier
state.
Field Description
IGMP Snooping
Querier VLAN
Mode
The administrative mode of IGMP Snooping Querier on the VLAN.
Querier Election
Participate Mode
Indicates whether the IGMP Snooping Querier participates in querier election if it discovers
the presence of a querier in the VLAN.
Querier VLAN
Address
The IP address will be used in the IPv4 header while sending out IGMP queries on this
VLAN. It can be configured using the appropriate command.
Operational State The operational mode of IGMP Snooping Querier on the VLAN.
Operational
Version
The IGMP version that will be used while sending out IGMP queries on this VLAN.