Command Reference Guide

MLD Snooping Commands
CLI Command Reference
September 2014 Page 438
HP Moonshot Switch Module CLI Command Reference
set mld mcrtexpiretime
Use this command to set the Multicast Router Present Expiration time. The time is set for the system, on a
particular interface or VLAN. This is the amount of time in seconds that a switch waits for a query to be received
on an interface before the interface is removed from the list of interfaces with multicast routers attached. The
range is 0 to 3600 seconds. A value of 0 indicates an infinite timeout, i.e. no expiration.
no set mld mcrtexpiretime
Use this command to set the Multicast Router Present Expiration time to 0. The time is set for the system, on
a particular interface or a VLAN.
set mld mrouter
Use this command to configure the VLAN ID for the VLAN that has the multicast router attached mode enabled.
no set mld mrouter
Use this command to disable multicast router attached mode for a VLAN with a particular VLAN ID.
Default 0
Format
set mld mcrtexpiretime vlanid 0-3600
Mode VLAN Mode
Default 0
Format
set mld mcrtexpiretime 0-3600
Mode • Global Config
•Interface Config
Format
no set mld mcrtexpiretime vlanid
Mode VLAN Mode
Format
no set mld mcrtexpiretime
Mode • Global Config
•Interface Config
Format
set mld mrouter vlanid
Mode Interface Config
Format
no set mld mrouter vlanid
Mode Interface Config