Command Reference Guide

MLD Snooping Commands
CLI Command Reference
September 2014 Page 439
HP Moonshot Switch Module CLI Command Reference
set mld mrouter interface
Use this command to configure the interface as a multicast router-attached interface. When configured as a
multicast router interface, the interface is treated as a multicast router-attached interface in all VLANs.
no set mld mrouter interface
Use this command to disable the status of the interface as a statically configured multicast router-attached
interface.
show mldsnooping
Use this command to display MLD Snooping information. Configured information is displayed whether or not
MLD Snooping is enabled.
When the optional arguments
unit/slot/port or vlanid are not used, the command displays the following
information.
When you specify the
unit/slot/port value, the following information displays.
Default disabled
Format
set mld mrouter interface
Mode Interface Config
Format
no set mld mrouter interface
Mode Interface Config
Format
show mldsnooping [unit/slot/port | vlanid]
Mode Privileged EXEC
Term Definition
Admin Mode Indicates whether or not MLD Snooping is active on the switch.
Multicast Control Frame
Count
The number of MLD Control frames that are processed by the CPU.
Interfaces Enabled for MLD
Snooping
Interfaces on which MLD Snooping is enabled.
VLANs Enabled for MLD
Snooping
VLANs on which MLD Snooping is enabled.
Term Definition
MLD Snooping Admin Mode Indicates whether MLD Snooping is active on the interface.
Fast Leave Mode Indicates whether MLD Snooping Fast Leave is active on the VLAN.