Command Reference Guide

MLD Snooping Commands
CLI Command Reference
September 2014 Page 441
HP Moonshot Switch Module CLI Command Reference
show mldsnooping ssm entries
Use this command to display the source specific multicast forwarding database built by MLD snooping.
A given {Source, Group, VLAN} combination can have few interfaces in INCLUDE mode and few interfaces in
EXCLUDE mode. In such instances, two rows for the same {Source, Group, VLAN} combinations are displayed.
show mldsnooping ssm stats
Use this command to display the statistics of MLD snooping’s SSMFDB. This command takes no options.
Format
show mldsnooping ssm entries
Mode Privileged EXEC
Term Definition
VLAN ID The VLAN on which the entry is learned.
Group The IPv6 multicast group address.
Source IP The IPv6 source address.
Source Filter
Mode
The source filter mode (Include/Exclude) for the specified group.
Interfaces If Source Filter Mode is “Include,” specifies the list of interfaces on which a incoming packet
is forwarded. If it’s source IP address is equal to the current entry’s Source, the destination
IP address is equal to the current entry’s Group and the VLAN ID on which it arrived is
current entry’s VLAN.
If Source Filter Mode is “Exclude,” specifies the list of interfaces on which a incoming packet
is forwarded. If it’s source IP address is *not* equal to the current entry’s Source, the
destination IP address is equal to current entry’s Group and VLAN ID on which it arrived is
current entry’s VLAN.
Format
show mldsnooping ssm stats
Mode Privileged EXEC
Term Definition
Total Entries The total number of entries that can possibly be in the MLD snooping’s SSMFDB.
Most SSM FDB
Entries Ever Used
The largest number of entries that have been present in the MLD snooping’s SSMFDB.
Current Entries The current number of entries in the MLD snooping’s SSMFDB.