Command Reference Guide

MLD Snooping Commands
CLI Command Reference
September 2014 Page 442
HP Moonshot Switch Module CLI Command Reference
show mldsnooping ssm groups
Use this command to display the MLD SSM group membership information.
show mac-address-table mldsnooping
Use this command to display the MLD Snooping entries in the Multicast Forwarding Database (MFDB) table.
clear mldsnooping
Use this command to delete all MLD snooping entries from the MFDB table.
Format
show mldsnooping ssm groups
Mode Privileged EXEC
Term Definition
VLAN VLAN on which the MLD v2 report is received.
Group The IPv6 multicast group address.
Interface The interface on which the MLD v2 report is received.
Reporter The IPv6 address of the host that sent the MLDv2 report.
Source Filter Mode The source filter mode (Include/Exclude) for the specified group.
Source Address List List of source IP addresses for which source filtering is requested.
Format
show mac-address-table mldsnooping
Mode Privileged EXEC
Term Definition
VLAN ID The VLAN in which the MAC address is learned.
MAC Address A multicast MAC address for which the switch has forwarding or filtering information. The
format is 6 two-digit hexadecimal numbers that are separated by colons, for example
01:23:45:67:89:AB.
Type The type of entry, which is either static (added by the user) or dynamic (added to the table
as a result of a learning process or protocol.)
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
Format
clear mldsnooping
Mode Privileged EXEC