Command Reference Guide

MLD Snooping Querier Commands
CLI Command Reference
September 2014 Page 444
HP Moonshot Switch Module CLI Command Reference
set mld querier query_interval
Use this command to set the MLD Querier Query Interval time. It is the amount of time in seconds that the
switch waits before sending another general query.
no set mld querier query_interval
Use this command to set the MLD Querier Query Interval time to its default value.
set mld querier timer expiry
Use this command to set the MLD Querier timer expiration period. It is the time period that the switch remains
in Non-Querier mode once it has discovered that there is a Multicast Querier in the network.
no set mld querier timer expiry
Use this command to set the MLD Querier timer expiration period to its default value.
Format
no set mld querier [address]
Mode Global Config
Default disabled
Format
set mld querier query_interval 1-1800
Mode Global Config
Format
no set mld querier query_interval
Mode Global Config
Default 60 seconds
Format
set mld querier timer expiry 60-300
Mode Global Config
Format
no set mld querier timer expiry
Mode Global Config