Command Reference Guide

MLD Snooping Querier Commands
CLI Command Reference
September 2014 Page 446
HP Moonshot Switch Module CLI Command Reference
When you specify a value for vlanid, the following information appears.
When the optional argument
detail is used, the command shows the global information and the information
for all Querier-enabled VLANs. Additionally, the detailed command shows the information in the following
table.
Field Description
MLD Snooping
Qurerier VLAN
Mode
The administrative mode of the MLD snooping querier on the VLAN.
Querier Election
Participate Mode
Indicates whether the MLD Snooping Querier participates in querier election if it discovers
the presence of a querier in the VLAN.
Querier VLAN
Address
The IP address will be used in the IPv6 header while sending out MLD queries on this VLAN.
It can be configured using the appropriate command.
Operational State The operational mode of the MLD snooping querier on the VLAN.
Operational
Version
This version of IPv6 will be used while sending out MLD queriers on this VLAN.
Field Description
VLAN ID The ID of the VLAN for which MLD snooping querier information is displayed.
Last Querier Address Indicates the IP address of the most recent Querier from which a Query was
received.
Last Querier Version Indicates the MLD version of the most recent Querier from which a Query
was received on this VLAN.