Command Reference Guide

Port Security Commands
CLI Command Reference
September 2014 Page 448
HP Moonshot Switch Module CLI Command Reference
no port-security max-dynamic
This command resets the maximum number of dynamically locked MAC addresses allowed on a specific port
to its default value.
port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed on a port . The valid range
is 0–20.
no port-security max-static
This command sets maximum number of statically locked MAC addresses to the default value.
port-security mac-address
This command adds a MAC address to the list of statically locked MAC addresses for an interface or range of
interfaces. The
vid is the VLAN ID.
no port-security mac-address
This command removes a MAC address from the list of statically locked MAC addresses.
Format
no port-security max-dynamic
Mode Interface Config
Default 1
Format
port-security max-static maxvalue
Mode Interface Config
Format
no port-security max-static
Mode Interface Config
Format
port-security mac-address mac-address vid
Mode Interface Config
Format
no port-security mac-address mac-address vid
Mode Interface Config